Coverage Explained

Insurance for HVAC Maintenance Contractors: Coverage for Service Agreements and Crews

HVAC maintenance contractor insurance has to answer to the service agreement you sign, not only to the policy you buy. Public bids and statutes show what customers can demand: indemnity, additional insured status, crew coverage. Which policy pays depends on your own wording and your agent. Treat what follows as general education, not legal advice.

What does HVAC maintenance contractor insurance have to satisfy in a service agreement?

Recurring service work arrives with paperwork, and that is where the insurance conversation starts. A published bid shows it in writing.

Edgemont Union Free School District in New York solicited HVAC maintenance and repair services on an as-needed basis at its buildings, putting a vendor on contract that the district can call when service is required. That is what this district asked for. It is not evidence of what other schools or building owners require, and this post does not treat it that way.

The district’s bid required the contractor to name the district as an unrestricted additional insured on the contractor’s insurance policies, with the exception of workers’ compensation. It named a specific additional insured endorsement, CG 20 10 11 85 or broader, and asked that the certificate of insurance state the endorsement was being used. It also required the contractor’s coverage to be primary for the district, its board, employees and volunteers.

Service agreement
signed, then renewed
→
Recurring visit
the same site, again and again
→
Crew
employees, vehicles, subcontractors
→
Contract clause
indemnity and insurance
↵ The clause is part of the agreement, so every renewal brings the same questions back to the start
The loop a recurring service agreement creates: the agreement sends a crew to the same site again and again, and the indemnity and insurance clauses in that agreement govern all of it. No figures are shown.

The bid also carried a hold harmless form. It says the contractor’s assumption of indemnity, liability and loss survives the contractor’s completion of service or other performance and any termination of the contract. The form reaches injury to the contractor’s own employees and others employed by it in connection with their performance under the contract, however caused. We did not find a source on whether that form would be enforced under New York law, so read it as the district’s requirement and nothing more.

Can a building owner make you answer for its own negligence in Colorado?

Colorado is the state this post uses as a worked example, because its legislature wrote the rule down. The Colorado General Assembly stated in the statute that construction businesses had begun using contract provisions to shift financial responsibility for their own negligence to others. The operative text is in C.R.S. 13-21-111.5(6).

In Colorado, a provision in a construction agreement that requires a party to indemnify, insure or defend another against liability for injury or property damage caused by the other party’s own negligence is void as against public policy and unenforceable, subject to the exceptions in the same subsection.

The part that matters to a maintenance contractor is the definition. Colorado defines a construction agreement to include a contract for labor or materials for the repair, maintenance, inspection or testing of a building, not only new construction. Whether your particular recurring service agreement qualifies is a legal question the statute text alone does not answer, and an attorney is the person to ask.

Some more details from the statute. Its definition of a construction agreement does not include a real property lease or rental agreement between a landlord and tenant. And Colorado law applies to every construction agreement affecting improvements to real property in Colorado, whatever the contract says about choice of law. This post says nothing about the rules of any other state, because the sources we read do not cover them.

Which clauses survive the Colorado rule?

The statute does not wipe out every risk-transfer clause. Colorado’s statute leaves in place indemnity and insurance obligations that are limited to the share of negligence or fault attributable to the indemnitor.

The statute also states that the subsection does not apply to a contract clause that requires the indemnitor to buy and carry insurance covering the indemnitor’s own acts or omissions. A promise to purchase insurance is therefore not treated the way a promise to indemnify is.

Additional insured status is where the wording gets narrow. Under the Colorado subsection, a requirement to name the other party as an additional insured is outside the voiding rule only to the extent the additional insured coverage responds to liability due to the indemnitor’s own acts or omissions. That is a statement about what the statute allows. It is not a statement about what your endorsement does, and the endorsement wording is the thing to put in front of your agent.

If you work in Colorado, our page on HVAC contractor insurance in Colorado covers the state-level picture. The statute printouts we read are the legislature’s 2024 published edition, and we did not locate a later one, so confirm the current text before relying on it.

Real-World Scenario: An illustration, not a real case. A contractor signs a recurring maintenance agreement, and the customer’s form arrives with a hold harmless page and an insurance page stapled behind the scope of work. The office files it without anyone reading those pages against the policy. When the customer later asks for updated paperwork, the contractor is only now learning what the pages require. Reading them before signing would have cost an afternoon.

What does the agreement ask about your crew?

A maintenance agreement is carried out by people in trucks, so the crew section of the paperwork deserves the same attention as the indemnity page.

Start with workers’ compensation. Colorado requires an employer subject to its workers’ compensation articles to secure compensation for all employees through the methods the statute lists. It is also unlawful in Colorado for an employer to require an employee to pay any part of the cost of workers’ compensation insurance, subject to the exceptions the statute cites in C.R.S. 8-44-101. Which employers are subject to the articles is defined elsewhere in the statute, and we did not read that part. Our workers’ compensation page covers how the line works for HVAC crews, and how to reduce HVAC workers’ comp costs covers the cost side.

Edgemont’s bid asked for statutory workers’ compensation, employers’ liability and New York disability benefits insurance for all employees. Its hold harmless form reaches injury to the contractor’s own employees, however caused. Ask your agent to confirm that your workers’ compensation program and the promises in the agreement line up.

Next, vehicles. The same bid required automobile liability covering owned, hired and borrowed, and non-owned motor vehicles. A crew that drives company trucks, a personal vehicle for an emergency call, or a rented van brings a different auto question each time. Our commercial auto page covers company vehicles, and hired and non-owned auto insurance for HVAC contractors covers the vehicles you do not own.

Finally, who does the work. The bid barred subcontracting of any of the work without the district’s prior approval, and it separately required trained personnel directly employed and supervised by the contractor. If you ever send a subcontractor to cover a visit, read that clause of your own agreement before you do.

Does a maintenance contract keep you exposed after the visit ends?

Edgemont’s bid set its commercial general liability aggregates for both general and products and completed operations exposures, so completed operations was a named line of the required program. Its hold harmless form made the contractor’s assumption of indemnity survive completion of the service.

We have a full explanation of that coverage in what completed operations coverage means for HVAC contractors, so this post does not repeat it. We did not find a public source explaining how completed operations responds to ongoing maintenance work, or how the occurrence and claims-made triggers apply to it. Ask your agent to explain, in writing, how your general liability is written to respond to work you perform under a recurring agreement. The general liability page shows how the line is built.

If you are building recurring agreements as a revenue line, how to increase maintenance agreement revenue covers that side. The insurance questions here come with every agreement you add.

What do the federal rules say about hazards on a service call?

Federal standards come up in service work, and neither should be read as settling a given call.

The text of 29 CFR 1910.147, the lockout and tagout standard, says it applies where servicing or maintenance exposes employees to unexpected energization or start up of machines or equipment, or to a release of stored energy that could injure them. The same standard states that it does not cover construction and agriculture employment. Which standard applies to a specific job is a question for OSHA or a safety professional, and we did not find a source that answers it.

The federal construction standard, 29 CFR 1926.501, requires an employer to determine whether the surface its employees will work on has the strength and structural integrity to support them safely, and to let them work there only when it does. It also requires employers to protect employees from falls from unprotected sides and edges using guardrail protection, safety nets or personal fall arrest systems. Whether rooftop equipment service falls under that construction part or under the general industry part was not sourced.

What should you ask your agent before you sign?

Bring the full agreement, not a summary, and ask for written answers to these questions:

  • Is the additional insured requirement written on the endorsement the agreement names, and does your policy provide it?
  • Does the agreement ask for coverage to be primary, and can your policies be written that way?
  • Does the hold harmless page promise more than your insurance is built to support?
  • Do the workers’ compensation and employers’ liability requirements match what you carry?
  • Do the auto requirements cover every vehicle your crew uses on these accounts?
  • Is a subcontractor allowed, and what proof of coverage would you need from that subcontractor?

Then take the same agreement to an attorney, because the insurance answer and the legal answer are different questions. When the agreement and the policy match, request a quote or read our overview of HVAC contractor insurance for the lines that sit behind these answers.

Sources read for this post: the Colorado General Assembly’s statute printout containing the construction-agreement section, its labor and industry statute printout, the Edgemont invitation to bid for HVAC maintenance and repair service, the eCFR text of the lockout and tagout standard, and the eCFR text of the fall protection duty.

The bottom line

HVAC maintenance contractor insurance is judged against the agreement, so read the indemnity page, the additional insured wording, and the crew requirements before the work begins. Published sources show what a New York school district asked for and what Colorado’s statute allows, but neither tells you which policy pays. That answer sits in your own policy wording, so put the agreement in front of your agent before you sign.

Frequently asked questions

Who should read the hold harmless page in a service agreement?

Read it yourself, then give it to your agent and to an attorney. Your agent can tell you how the wording lines up against the policies you carry, and an attorney can tell you what the clause means under the law that governs the agreement. Neither review is something to leave until a visit has gone wrong. Do both while the customer still expects questions, before the agreement is signed.

Should my agent see a service agreement before or after I sign it?

Before. A certificate request, an endorsement requirement, or an indemnity clause is far easier to discuss while the agreement is still a draft. Send the agent the full document, including the insurance page and any attachments, and ask for a written answer on what your current policies will and will not satisfy. If a gap shows up, you can raise it with the customer while changes are still possible.

What if a customer will not change its form?

Then the decision is yours, and it should be made with your agent and attorney in the room. Ask the customer whether the wording can be adjusted, and ask your agent whether the requirement can be met as written, met with an added endorsement, or not met at all. If it cannot be met, declining the agreement is a legitimate business decision. Signing a promise your policy is not built to support is the outcome to avoid.

What records should I keep for recurring service work?

Keep the signed agreement, every certificate of insurance you issued under it, and the endorsement pages your agent sent with those certificates. Add a record of which crew members and subcontractors worked each account and where their coverage proof is filed. When a customer asks for updated paperwork, or a claim is reported, those documents let you answer quickly and let your agent see exactly what you promised.

Do I need to tell my agent when a crew member starts driving to accounts?

Yes, tell your agent whenever the way your crew travels changes. Driving a company truck, using a personal vehicle for a call, and renting a vehicle for a busy stretch can each raise a different auto coverage question, and the answer depends on your policy. Raise it before the change, ask your agent to confirm what responds, and get that confirmation in writing alongside the agreement’s auto requirement.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and HVAC Guard Insurance, a specialty insurance agency placing HVAC contractor coverage in 48 states across a 25-carrier specialty panel. He places general liability, workers’ compensation, and commercial auto for HVAC contractors, and he reads a customer’s contract insurance page against the policy before the certificate is issued. Connect via the HVAC Guard Insurance quote form or call 317-942-0549.

Insure your HVAC business with a CPCU-led agency

Tell us how your operation runs — residential service, commercial and mechanical, or both — and we will market it to carriers that write the class.