Cost Guides

How Much Is Insurance for an HVAC Company With Employees?

Outdoor condensing units standing on a wet flat roof deck

Insurance for an HVAC company, covering general liability, property, workers’ comp and auto, usually ranges from $1,500 for a small operation to over $4,000 for a larger one with multiple employees and vehicles. General liability alone runs about $400–$1,000+ a year for a one-man shop and scales to $750–$2,000+ with numerous employees. This is general education.

Why does the cost climb as an HVAC company adds employees?

Because each new employee changes more than one line. An employee adds payroll, and general liability is priced based on payroll. An employee adds workers’ comp, which covers injuries on the job. An employee usually adds a van, which adds commercial auto. And a bigger crew usually means more tools on the road and more property at the shop.

That is why a one-man shop and a company with a crew sit at different ends of the range. A small operation is usually near the low end. A company with multiple employees and vehicles is usually above it. Our post on how much general liability costs for a one-man HVAC shop covers the starting point.

General liability
Priced on payroll, scales up with employees
Workers comp
Added with the first employee, driven by payroll and classification
Commercial auto
Grows with each van and driver
Property and equipment
Grows with the shop, tools and inventory
The total climbs as the company adds people and vehicles.
The lines that make up an HVAC company’s insurance and how each one grows with the crew. A teaching sketch; the amounts are in the text, not the figure.

What does each line cover, and what moves it?

General liability answers for injury or damage your work causes to others, including completed operations claims after the job. It is priced based on payroll, and the type of work matters: new installation, commercial rooftop work, gas piping and refrigeration are usually viewed differently from residential service. See general liability.

Workers’ compensation covers employees hurt on the job. It is driven by payroll and the classification of that payroll, and over time by your claims experience. Our post on the HVAC workers comp class code explains classification, and how to reduce HVAC workers comp costs explains the experience modifier. See workers compensation.

Commercial auto covers the vans and trucks and the liability from driving them. It grows with each vehicle and driver, and driving records matter. See commercial auto and our post on commercial auto for an HVAC business with multiple vehicles.

Property and equipment covers the shop, its contents and the tools that travel. Inventory, recovery machines, lifts and test equipment add up as a company grows. See contractors equipment and our post on how business property insurance works after a theft.

Many growing companies add an umbrella when commercial customers ask for higher limits.

Do these figures apply in every state?

They are nationwide ranges, not a quote for any state. State rules move the numbers, especially for workers’ comp. North Dakota, Ohio, Washington and Wyoming sell workers’ comp only through a state fund, and Texas lets private employers decide whether to carry it. Licensing rules also vary, and some states make liability insurance a condition of the HVAC license.

Each of our state cost guides opens with these nationwide ranges and then explains what moves the price in that state. Start with the national HVAC insurance cost guide and the guide for your state.

Real-World Scenario: An illustration, not a real case. A two-van residential shop hires three technicians and buys two more vans over one year. At renewal, the owner sends the agent the new payroll by job type, the new vehicles and drivers, and the updated tool list. The agent explains which lines grew and why: workers’ comp and general liability with payroll, auto with the vans. The owner sees the increase coming instead of discovering it at audit.

The same approach works in reverse. When a technician leaves or a van is sold, tell the agent so the policy reflects the smaller operation. Many companies pay for vans they no longer own or payroll they no longer have simply because nobody updated the policy. An annual walk-through of payroll, vehicles, drivers, tools and locations keeps the program matched to the company you actually run, and keeps the cost matched to it too.

How does the program change as the company grows?

Most HVAC companies follow a similar path, even if the timing differs. A one-man shop starts with general liability, commercial auto for the van and contractors equipment for the tools. The first employee usually brings workers’ comp and a second set of tools, and often a second van. As the crew grows, payroll pushes general liability and workers’ comp up, more vans push auto up, and a shop or warehouse brings property coverage for the building, inventory and office.

Somewhere along that path, commercial customers start asking for higher limits, and an umbrella becomes the efficient way to meet them. Some companies add coverage for specialty exposures as their work changes, such as riggers liability for crane-set rooftop units or an installation floater for equipment waiting on job sites. That is why the total climbs from the small-operation end of the range to above it: the company is not just bigger, it is doing more kinds of work in more places.

Are the owners covered under workers’ comp?

That depends on the state and the type of business. Some states let certain owners, partners or officers exclude themselves from workers’ comp, and some require them to be included or let them opt in. Including an owner who works in the field adds payroll to the policy and adds cost. Excluding the owner lowers the cost but leaves the owner without workers’ comp benefits if hurt on a roof. Ask your agent which choices your state allows, and decide on purpose rather than by default.

When is an umbrella worth adding?

Usually when contracts require it, or when the company has grown enough that a serious claim could exceed its base limits. An umbrella sits over general liability, auto and employer’s liability, and it is often a more efficient way to reach higher limits than raising each policy. Our post on whether an HVAC business needs an umbrella policy explains how it works.

Why does accurate payroll matter so much?

Because two of the biggest lines are built on it. General liability is priced based on payroll, and workers’ comp is driven by payroll and its classification. Both usually start with an estimate and are checked by an audit after the term.

If you hire faster than your estimate assumed, the audit can bring an additional bill. If technicians’ payroll is classified wrong, the premium can be wrong in either direction. Track payroll by job type during the year, tell your agent when you hire, and keep subcontractor certificates on file so the auditor does not count uninsured subs as your employees.

How can a growing HVAC company control the cost?

You cannot control the market, but you can control how your company looks to an underwriter.

  • Safety. A working safety program reduces injuries, which feeds workers’ comp experience over time.
  • Claims handling. Report injuries and incidents promptly, and bring injured technicians back to work when it is safe.
  • Drivers. Check driving records before someone gets a van, and keep a written driver policy.
  • Documentation. Keep job records on installations, especially gas, venting and condensate work.
  • Subcontractors. Collect certificates before subs start.
  • Contracts. Read the insurance section of every commercial contract so you buy what customers actually require, not more or less.
  • Annual review. Sit down with your agent each year as the company changes.

What should you ask your agent?

  • How does my quote break down by line, and which line is growing fastest?
  • Is my payroll classified correctly for each type of work?
  • Are all my vans, drivers, tools and locations listed?
  • Do my customers require limits that call for an umbrella?
  • What will the year-end audits look at, and how can I avoid surprises?

When you are ready, request a quote, or read how we work.

The bottom line

Insurance for an HVAC company, covering general liability, property, workers’ comp and auto, usually ranges from $1,500 for a small operation to over $4,000 for a larger one with multiple employees and vehicles. General liability alone runs about $400–$1,000+ a year for a one-man shop and slowly scales up to $750–$2,000+ with numerous employees, because GL is priced based on payroll. Employees add workers’ comp and more payroll, and vehicles add auto, which is why the total climbs as the company grows.

Frequently asked questions

How much is insurance for an HVAC company with employees?

HVAC insurance covering general liability, property, workers’ comp and auto usually ranges from $1,500 for a small operation to over $4,000 for a larger one with multiple employees and vehicles. General liability alone scales from about $400–$1,000+ a year for a one-man shop to about $750–$2,000+ with numerous employees, because GL is priced based on payroll.

Why does hiring employees raise my insurance cost so much?

Employees add workers’ comp, which covers their injuries on the job, and they add payroll, which is what general liability is priced on. More employees usually also means more vans on the road. Each of those adds to the total, which is why a company with a crew pays more than a one-man shop.

Which line costs the most for an HVAC company with employees?

That depends on the company. Workers’ comp is driven by payroll and classification, general liability by payroll and the work, and auto by the number of vehicles and drivers. We do not have a source that ranks them for every HVAC company, so ask your agent to break your quote down line by line.

Do these figures apply in my state?

They are nationwide ranges, not a quote for any one state. State workers’ comp rules, licensing requirements and local markets move the numbers. Four states sell workers’ comp only through a state fund, and Texas lets private employers opt out. Our state cost guides explain what moves the price in each state.

How can a growing HVAC company control insurance costs?

Classify payroll accurately, keep a working safety program, manage claims promptly, vet drivers before they get a van, document installations and collect certificates from subcontractors. Those habits shape how insurers view the company over time, and they keep the year-end audit free of surprises.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and HVAC Guard Insurance, a specialty insurance agency placing HVAC contractor coverage in 48 states across a 25-carrier specialty panel. He is a broker and CPCU who places general liability, workers compensation, commercial auto and property coverage for HVAC companies as they grow from a single van to multi-crew operations. Connect via the HVAC Guard Insurance quote form or call 317-942-0549.

Insure your HVAC business with a CPCU-led agency

Tell us how your operation runs — residential service, commercial and mechanical, or both — and we will market it to carriers that write the class.