Coverage Explained

How Does Inland Marine Insurance Handle Tool Theft From Job Sites and Trailers?

An HVAC technician in a hard hat reaching into the open grille of a ceiling-cassette unit in a commercial interior

Inland marine insurance, usually in the form of contractors equipment coverage, is the line built to answer tool theft from job sites, job boxes and trailers. How it handles a particular theft depends on your form: scheduled or blanket items, conditions for unattended property, and how the loss is valued. Consider this general education, not legal advice.

Why is inland marine the line for job-site theft?

Because it is designed for property that moves. A business property policy is generally written around a location, and the NAIC’s small business insurance guide describes the main coverages a small business typically considers. Tools that ride from site to site, sit in job boxes or travel on trailers spend most of their time somewhere else. Inland marine fills that gap.

For an HVAC contractor, the two inland marine lines that matter most are contractors equipment for the tools you own and an installation floater for the units and materials you are about to install. Our post on contractors equipment versus an installation floater explains both. This post looks at how the equipment side handles theft away from the van.

In the van
Van on commercial auto, tools usually on contractors equipment
In a job box on site
Contractors equipment, subject to the form’s theft conditions
In a trailer
Trailer may be on auto, contents on inland marine
Waiting to be installed
Usually an installation floater, not contractors equipment
Where HVAC tools and equipment sit when they are stolen, and which coverage question each place raises. A teaching sketch, not a policy summary. No figures are shown.

How does a contractors equipment form handle a theft?

Three parts of the form decide most theft claims.

What is covered. Some forms schedule specific items, such as a recovery machine or a lift, often with a stated value. Others cover a category of tools on a blanket basis up to a limit, sometimes with a cap on any single item. If a stolen item is neither scheduled nor within a blanket category, it may not be covered.

The conditions. Some forms set conditions for theft, such as requiring visible signs of forced entry, or setting rules for property left in an unattended vehicle or unlocked storage. These conditions vary by form. Read yours.

The valuation. A form may pay replacement cost or actual cash value, which takes depreciation into account. Our post on whether insurance covers tools stolen from your van explains why that choice matters when a five-year-old recovery machine walks off a site.

What about trailers?

A trailer raises two questions. The trailer itself may be listed on your commercial auto policy, or it may be covered elsewhere. The equipment inside is usually an inland marine question. Ask your agent how each trailer is covered, and whether the coverage still applies when the trailer is unhitched and parked on a site.

A trailer full of tools on an empty job site is an obvious target. Hitch locks, wheel locks and parking inside a lit or fenced area all help. Write down the trailer’s identification number and photograph what is inside at the end of each week.

Real-World Scenario: An illustration, not a real case. An HVAC contractor leaves a locked equipment trailer on a new-construction site over a weekend. On Monday the lock is cut and a vacuum pump, a recovery machine and two gauge sets are gone. The owner sends the agent the police report, photos of the cut lock and a list of serial numbers kept in a spreadsheet. The claim is filed under the contractors equipment policy, and the trailer’s damaged door goes to the auto side.

What about units and materials stored on the site?

Condensers, air handlers, line sets and ductwork waiting to be installed are a different kind of property. They are not tools; they are materials you are about to turn into part of the building. That is usually a question for an installation floater, or for the project’s builders risk policy if the owner or general contractor carries one. Contractors equipment generally does not cover them.

If units are delivered to a site days before you install them, ask who carries the risk of theft while they sit there. The answer may be in your contract as much as in your policy.

Theft of new equipment from construction sites is a familiar problem for contractors in every trade, and condensers are a common target because they hold copper and aluminum. Practical steps help. Schedule deliveries as close to installation as you can. Ask the general contractor to store units in a locked area. Photograph each unit with its serial number when it arrives. If the contract puts the risk on you until the work is accepted, make sure an installation floater or the project’s builders risk policy answers for the units while they sit, and confirm which one before the delivery truck shows up.

What security habits help on a job site?

Coverage pays after a theft. Habits make the theft less likely and the claim easier. On a busy construction site, tools and equipment are often left overnight because hauling everything back each evening is not practical. That makes a little planning worthwhile.

Use a heavy, locked job box, ideally chained to something fixed or placed inside a locked room or container. Keep the most valuable items, such as recovery machines and digital instruments, in the van or back at the shop overnight when you can. Ask the general contractor about site security, lighting and cameras, and note what they tell you. Engrave or mark your tools with the company name, which makes them harder to sell and easier to identify if recovered.

On long projects, a short end-of-day checklist helps: what stays, where it is locked, and who checked it. Pair it with a weekly photo of the job box contents. If a theft happens, that photo and the checklist show the insurer what was there and how it was secured, which is often what the theft conditions in the form are asking about.

Are your technicians’ own tools covered?

Not necessarily, and this surprises a lot of shop owners. Many HVAC technicians bring their own hand tools, meters and sometimes larger gear. Whether your contractors equipment policy covers property your employees own depends on the form. Some forms can cover employee tools, sometimes only up to a set amount per person. Others cover only property your business owns, rents or is responsible for.

Ask your agent directly whether employee-owned tools are covered, and on what terms. Then tell your technicians the answer. A technician who loses a personal tool bag in a job-site theft will want to know whether your policy, their own homeowners or renters policy, or nobody pays for it. Our post on HVAC tool bags covers how technicians carry their kit.

What about rented or borrowed equipment?

HVAC jobs often bring in equipment you do not own: a rented lift, a borrowed welder, a vacuum pump from a supply house. If that equipment is stolen from your site while it is in your care, the rental company will usually look to you. Your rental agreement may also require you to insure it.

Some contractors equipment forms can cover rented or borrowed equipment, sometimes with its own limit. Read the rental agreement before you sign it, check what it asks you to carry, and confirm with your agent that the equipment is covered from the moment it arrives on the site until it goes back.

How can you make a theft claim easier?

Documentation is what turns a theft into a payable claim.

  • Keep a list of tools with makes, models and serial numbers.
  • Photograph your equipment, especially high-value items.
  • Keep purchase receipts or invoices.
  • Report thefts to the police promptly and keep the report number.
  • Tell your agent the same day.

What should you ask your agent?

Bring your equipment list and ask for written answers.

  • Which items are scheduled, and which are covered on a blanket basis?
  • Are there theft conditions about forced entry, locked vehicles or unattended storage?
  • Does the form pay replacement cost or actual cash value?
  • How is each trailer covered, and how is the equipment in it covered?
  • Do I need an installation floater for units stored on job sites?

For a van left on a site overnight, see our post on whether commercial auto covers a vehicle parked overnight at a job site. When your list is ready, request a quote, or read how we work.

The bottom line

Inland marine insurance, usually in the form of contractors equipment coverage, is the line built to answer tool theft from job sites, job boxes and trailers, because it follows equipment away from your shop. How it handles a given theft depends on the form: whether the item is scheduled or blanket, whether there are conditions for unattended property, and whether it pays replacement cost or actual cash value. Units waiting to be installed are a different question, usually for an installation floater.

Frequently asked questions

Is inland marine the same as contractors equipment?

Contractors equipment is one kind of inland marine coverage. Inland marine is the broader family of coverages for property that moves or sits away from your main location. For an HVAC contractor, the inland marine lines that usually matter are contractors equipment for tools and an installation floater for units and materials waiting to be installed.

Does inland marine cover tools stolen from a locked job box?

It can, if the tools are covered property under your form and the loss meets the form’s conditions. Some forms ask for signs of forced entry or set rules about how property is secured. Read the theft wording on your own form, and keep receipts and serial numbers so you can prove what was taken.

Is the trailer covered too, or just the tools in it?

They may be covered by different policies. A trailer can be listed on your commercial auto policy, and the equipment in it on your inland marine policy. Ask your agent how each trailer you own is covered, and whether the coverage applies when the trailer is unhitched and parked on a job site.

What is the difference between scheduled and blanket coverage?

Scheduled coverage lists specific items, often with a value for each. Blanket coverage covers a category of property up to a limit, sometimes with a per-item cap. Many HVAC contractors schedule large items like recovery machines and lifts and cover small tools on a blanket basis. Ask your agent how your policy is built.

Are the HVAC units waiting to be installed covered for theft?

Usually not by contractors equipment, which covers your tools. Units and materials you are about to install are usually a question for an installation floater, or for the project’s builders risk policy if one exists. Our post on contractors equipment versus an installation floater explains the difference.

About the author

Nate Jones, CPCU

Nate Jones, CPCU, is the founder of Wexford Insurance and HVAC Guard Insurance, a specialty insurance agency placing HVAC contractor coverage in 48 states across a 25-carrier specialty panel. He is a broker and CPCU who places contractors equipment, installation floater and commercial auto coverage for HVAC contractors who store tools and equipment on job sites and in trailers. Connect via the HVAC Guard Insurance quote form or call 317-942-0549.

Insure your HVAC business with a CPCU-led agency

Tell us how your operation runs — residential service, commercial and mechanical, or both — and we will market it to carriers that write the class.