Public entities that publish their insurance guidance describe CG 20 10 as the additional insured form for work in progress and CG 20 37 as the form for injury or damage after the work is done. How your own policy responds depends on its edition and wording, so confirm it with your agent before you sign.
Why do these two forms get compared?
When a prime contract or a subcontract lands on your desk, the additional insured paragraph may name these forms by number. The numbers look like a matching set, so this post sets the pair side by side, using only what named public owners say about them in their own published documents. It does not quote the insurance bureau that writes the forms, and none of what follows is a reading of a specific policy. For a longer look at the completed-operations form alone, see what CG 20 37 is and why a general contractor asks for it.
Which additional insured form covers ongoing operations, and which covers completed operations?
Sonoma County’s published guide to additional insured endorsements gives each form its own entry. For CG 20 10, the guide says it does not cover the additional insured’s liability for injury or damage that happens after the work is done, and it calls that a completed-operations hazard that needs a separate additional insured endorsement. For CG 20 37, the guide says it covers the additional insured for liability arising from injury or damage occurring after the work is completed. These descriptions are in the Sonoma County additional insured endorsements guide, and they refer to the CG 20 10 04 13 and CG 20 37 04 13 editions.
Louisiana’s Division of Administration reaches the same split in the sample contractor language in its state contract manual. In the edition we reviewed, the manual labels CG 20 10 as the form for ongoing work and CG 20 37 as the form for completed work, to be used when applicable.
Here is the comparison as a table.
| Ongoing-operations form | Completed-operations form | |
|---|---|---|
| Form | CG 20 10 | CG 20 37 |
| Sonoma County’s guide | Does not cover liability for injury or damage after the work is done | Covers liability for injury or damage occurring after the work is completed |
| Louisiana’s state contract manual | Labeled for ongoing work | Labeled for completed work |
| Sonoma County’s note on whose work | Protects the additional insured only if the work is performed for that party | Not stated in the guide text we reviewed |
Why do contracts name these forms in the same sentence?
Several published requirements put the pair together. Iowa State University’s contractor insurance requirements say the additional insured shall be added under CG 20 10 and CG 20 37 at a stated edition or older, and that company forms or vicarious liability versions that are narrower in scope will not be accepted. St. Lawrence University, a private institution, asks contractors to name it as additional insured using CG 2010 and CG 2037 (Completed Operations) or a substitute providing equivalent coverage.
The City of Manteca’s construction contract exhibit ties the completed-operations part to the contract itself. It asks for an endorsement at least as broad as CG 20 10 and CG 20 37 if completed operations coverage is required. That wording tells you to read whether your particular contract requires completed operations at all.
Purdue University’s construction insurance language is different again. It names CG 20 10 or CG 20 37 at a stated edition, or equivalent, and the source wording is “or” rather than “and.” So the conjunction in your clause matters. Do not assume that “the forms” in a contract means the pair, and do not assume it means just the ongoing-operations form. If the clause is unclear, ask the party that wrote it.
Does CG 20 10 ever reach completed operations?
Be careful with any rule that says never. The public sources disagree by edition, and none of them gives you a blanket answer.
Sonoma County’s reading of the CG 20 10 04 13 edition is the reading quoted above: no coverage for injury or damage after the work is done. Clallam County, Washington, wrote about an older edition. In an older manual, the county explains that the CG 20 10 11 85 form covers the additional insured for liability arising out of the contractor’s work, so it may also cover claims that arise because of the contractor’s negligence after the contractor is done with the work. The county adds that this older form is not available from many insurers. It recommends requiring CG 20 10 10 01 together with CG 20 37 10 01 to provide coverage similar to the older form.
The New York State guidelines for insurance requirements in contracts point the same direction from the other side. They say later revisions of CG 20 10 exclude certain facets of coverage that are important to the contracting agency, specifically coverage during the products and completed operations phase. Those guidelines are written about a template that still names the CG 20 10 11 85 edition.
Read together, these sources say the edition on your endorsement can change the answer. That is why the edition date printed on the endorsement is worth a line in your file, and why your agent should tell you which edition is attached to your policy.
Which date matters when a claim shows up after the job?
Sonoma County’s guide says the important date for completed operations claims is the date when the injury or damage occurs, not the date when the faulty work was done. Sonoma County also says that proprietary completed-operations endorsements that restrict coverage to work done during the current policy period are unacceptable to it. Sonoma County gives the reason: the injury or damage may show up after the policy has renewed.
Those are statements about what Sonoma County will accept in its own contracts. They are not statements about how any particular insurer’s form reads. But they point to a question worth asking your agent: is the completed-operations endorsement on my policy tied to the date of the injury or damage, or does it reach back only to work performed in a certain policy period?
Is an equivalent endorsement good enough?
Several owners say yes, with limits. Sonoma County says it accepts other endorsements that have equivalent or similar language. The New York State guidelines tell agencies to evaluate the content of the endorsement and the coverage it affords, without regard to specific endorsement numbers. The guidelines’ sample language accepts the combination of CG 20 10 12 19 and CG 20 37 12 19 as providing equivalent coverage to the older CG 20 10 form.
Iowa State University takes the stricter position already noted: narrower company forms and vicarious liability versions will not be accepted. And Purdue says “or equivalent” while Manteca says “at least as broad as.”
The practical reading is that a form number alone does not settle the question for these owners. Several of them say they look at the wording. When your agent offers an endorsement from your insurer instead of the numbered form, send the endorsement itself to the party that wrote the contract and ask for a written reply.
What does a certificate prove about either form?
A certificate is not the endorsement. The Georgia Commissioner of Insurance states in Bulletin 23-EX-9 on certificates of insurance that certificates of insurance do not amend, alter, or extend the coverage provided by the policy. That is a state regulator’s position, offered here as Georgia’s. The Connecticut Insurance Department glossary says that an endorsement is typically required to effect additional insured status.
Some owners go further on the paperwork. Iowa State University also requires that the additional insured forms be attached to the certificate of insurance. So the certificate and the endorsements travel together for that owner, but the endorsement is still what carries the additional insured wording.
If you are asked to show that you have either form, ask your agent for the endorsement, not just the certificate. If a certificate is all that is being requested, remember that its issue does not add anyone to your policy. The New York Department of Financial Services also discusses the difference between a certificate holder and an additional insured in its Office of General Counsel opinion on certificates of insurance.
Do additional insured endorsements add limits for me?
Sonoma County’s guide says additional insured endorsements do not increase the policy limits, and that the named insured and all additional insureds share them. That means every party you add can draw on the same limits you rely on. If you accept many additional insured requests across many jobs, the shared limits are worth discussing with your agent, along with whether an umbrella policy belongs in the conversation.
What should I ask my agent before I sign?
Start with the contract, then work toward the policy.
- Does the clause say “and,” “or,” or “equivalent,” and does it say whether completed operations is required?
- Which edition of each endorsement would be attached, and is the wording the same as the form the contract names?
- Is the completed-operations endorsement tied to the date of the injury or damage, or to work done in a policy period?
- Will the endorsement be issued with the certificate, or only the certificate?
Real-World Scenario: An illustration, not a real case. A mechanical contractor receives a subcontract that names an ongoing-operations form in a paragraph and a completed-operations form in the next, ending with the words “or equivalent.” Instead of asking for a certificate alone, the contractor sends the whole clause to the agent and asks which endorsements will be attached and how each is worded. The reply goes into the job file next to the signed subcontract.
For the wider picture of what general contractors ask from HVAC subs, read how general contractors set insurance requirements for HVAC subs. For how completed work is covered on your own policy, see whether general liability covers completed operations for HVAC and what completed operations coverage is. The general liability coverage page and the HVAC contractor insurance overview explain the policy these endorsements attach to. When you have a contract in hand, request a quote and send the clause along with it, or read more about the author.
We did not find a published ISO or Verisk document describing these forms, and none of the sources above is specific to HVAC. Everything above is what the named sources say, so check the endorsement on your own policy.